Harvest Hot Water

Your Canberra heat pump hot water specialist

Call Us Now : 0422 986 470


Spread the love
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Price of the Stiebel Eltron WWK302 heat pump hot water system

The full price of the Stiebel Eltron WWK302 heat pump is $5,200 for a standard installation.  However, we can supply and install the system at a reduced cost of $4,200.

This is achieved when we create the renewable energy certificates that come with the system, and buy them from you for $1,000.  This brings the price of the Stiebel Eltron heat pump down to $4,200, making it excellent value for a heat pump hot water system of this quality.

A standard installation means that

  • You have a typical electric or gas hot water storage system located outside your house.
  • We are installing a Stiebel Eltron WWK302 heat pump in the same location.
  • The heat pump will largely utilise the existing plumbing, although if we are replacing a gas system, we would need to hard-wire the system to your switchboard.

At the time of installation, we will ask you to sign a form in which you assign the renewable energy credits from this installation to us.  These credits are known as Small-Scale Technology Certificates.

Price breakdown – Stiebel Eltron WWK 302 heat pump
Price including installation$5,200
Discount for assignment of STCs$1,000
You Pay$4,200

What does this price include?

  • The cost of delivering the heat pump to your premises, so long as you are no more than 30 km from our warehouse
  • Goods and services tax (GST)
  • Installation of the system by a licensed plumber and licensed electrician
  • Provision of all valves that may be needed (tempering, and possibly pressure limiting and non-return valves)
  • Provision of an isolation (on/off) switch at the wall, and a safety switch (RCD) at the switchboard
  • All necessary government compliance certificates
  • Removal of your existing hot water system
  • Removal of all heat pump packaging

To keep our administrative costs as low as possible, we require full payment at the time of installation, normally by credit card.

Non-standard installations

If we are not replacing a standard electric hot water system, some additional costs may arise. This usually happens when the heat pump is to be placed in a different location to the previous hot water system, where it replaces a gas hot water system, or where the heat pump is to be located in a new house. Typical additional costs are for:

  • A licensed electrician to provide cabling etc. to a new location (est. cost $330)
  • A licensed plumber to provide additional plumbing to the location (est. $300)
  • Provision of a solid base on which the heat pump is to be positioned (est. $100)

We will provide you with a firm quote prior to installation.

Stiebel Eltron WWK 302 heat pump image